Do you happen to have a rental property or maybe even your own property that have a chain link fence running the whole thing that’s not really attractive? Well, I have a secret tip for you for under fifty bucks that will let you redo your entire yard that I learned from the folks who manage a lot of rental properties – http://extendedstay-tucson.com. I’ve made a small mock up for you.
So imagine the ending product looking roughly like this from, obviously, the basic rustic metal pipes that you see in a lot of yards. So let me show you the products you need to make this come together. You’re just going to need to get yourself some standard six inch fencing board redwood and then you are going to fabricate a way to attach it using some conduit clamping. I happen to have one inch and wanted a quarter inch clamps.
Now it’s interesting is the one inch actually measures one and a quarter and the one and a quarter actually measures one and a half. So there might be a little bit of experimentation on your part , to figure out what you need. In addition, I’ve got a box of number eight screws, a three quarter inch and one inch which are going to screw in from the back of the clamps into the wood. And I will show you up here what I’ve done. Very simple.
From the back side you can clearly see, I’ve used the ducting clamp here to go around the pipe and it just screws right into the back of the board. Now you want to be careful that you get a screw that doesn’t go through to the front, where you can see it from your yard. That’s about it. So you can use some resourcefulness on your part to determine what size clamps you need and how long of screws you need.
I’ve showed you what I needed for this particular construction right here, but that is essentially it. There is another little detail you might notice right here, the top of the fence has these little risers with the hole in it for the pipe to go along the top and it causes the top board to stick out just a little bit, but the advantage of that is from our side, from the yard side, for this rental, is that it actually gives a nice reveal, it looks actually really attractive.
So, each application might be a little different, but this is just showing you how could think outside the box and be resourceful to use products that are not intended for what they are used for to do some really attractive and really simple and affordable fix for your yard. Here is one more little detail to save you a little bit of time.
Be sure that you put your clamps that are going to go on the boards that run vertically on first. Put then around, because once you have the board here, like this, from the back side, it might be hard to position those in. So, it’s easy to put them on first and then you can throw these boards on right on top of them, from the back side just screw them in.
What I am going to do is put all the boards up leaning on here first, I am going to have them sticking up and then I am going to be putting the boards to cross horizontally afterwards, sizing them in perfectly and then, after all that is done, I’ll be cutting off these extra pieces. So that makes the job super fast.
I am guessing this whole entire project is going to cost under fifty bucks and take about two hours. Okay. We’ve done the half way point we’ve measured the distance between the posts and did the boards half way roughly and so, now what we have to do is measure the exact amount that is left, cut those and we will cut those tops off and we will show you the finish product.
All right. So you can see where it has a seam in the middle here and as I go along, they are all connected and all there is left to do is just chop off this top riser and you might want to go straight across, that is how we are going to do it, we are going to go straight across, or you can have a nice little reveal, like a fence post, but I really like how this, naturally, has a little bump here.
Just because of the design of our fence, it has a nice reveal. So that’s it. And I will show you the finish product here in about ten minutes. Here you go. Super simple, hope you enjoyed that, hope it is useful for you, if you have it right on, you’re trying to spruce it up a little bit on the budget, or you just don’t want to waste a lot of time or money, takes a lot of time to put a large fence.
But taking advantage of the existing steel pipes, it’s kind of the way to go. I’ll go along the back side of the fence and you can see how it’s all done now. You see the straps here in the corners and how it’s on there, that’s pretty straightforward, so that is how it looks like from the back, completely done. So I am going to go around the front and show you how that looks like.
So here we are with the finish product and you can see it’s a whole heck better than looking at a chain link fence.
Clean up the outside of your house. Sometimes all it takes to produce your house look and feel is a little TLC on the outside. Trim the shrubs and yank the weeds of the flower bed. Add some cosmetic landscape lighting and make sure that all the outside light fixtures are in proper working order.
A great method to lessen your chance of mold growth in your household is by ensuring your toilet is well ventilated. Bathrooms which don't have some form of port or a window usually get steamy, but are not able to be rid of the humidity. This humidity leads to extensive mold development.
If you are going to do any home improvements, a staple tool is your drill. You want it to begin screws and to drive them in place. Make sure you have a drill that's cordless and battery used with a minimum of 9 volts. You also need to have drill bits of numerous sizes and screw attachments.
Smoke detectors are required for security in your home. Many homes just put them in particular areas. You can raise the security in your home, by installing additional detectors in areas like cellars, kitchens and bathrooms. These regions can sometimes be overlooked, though prone to fires as much or more compared to the rest of the home.
Consider the effect on the resale value of your home's before you embark on a home improvement job. For example, converting your garage into a living room may make sense for your immediate needs, but this type of addition turns off many home buyers. Even should you not plan on selling immediately, circumstances can change, and you may have to spend additional cash getting your home back to the way it was.
Consider converting unused rooms within your house. Before you spend too much cash adding two or more room to your house , seriously look at what you have to work with. Are you getting much use out of that exercise office or room? Even storage spaces like lofts may be transformed into something useful, like a bedroom.
It's essential to always keep your financial plan in mind, as you start your home improvement job. It is vital to plan the job out ahead of time and get costs on the substances that you need to make your vision a reality. It's also significant to consider the length of time you will be taken by the job.
Regardless of which type of home improvement job you have in your mind, the following post should assist you with a few pointers. Get creative and create a design you can be proud of. If you are definitely going to be doing a home improvement project, use the tips that you've read today to achieve your goals.
Self adhesive drywall patches are a must have home improvement (or home "repair") staple to keep on hand. These patches come in many forms that range from mesh drywall tape to those made of a polymer substance and you can find them at any home improvement store like Lowe's or Home Depot. Press them carefully into placean iron. Take care to not scorch the wall surface or the patch. Paint right over the patch and you'll never understand it's there.
Making home improvements is a great thought for making your home and raising your home's value a more enjoyable area, but it may also be a calamity if done wrong. Needing to fix your home improvements with further improvements can be avoided with just a little thought and effort. Use the below hints to practice the proper state of mind to make sure all your home improvements are successful.
Keep your house and family safe by correctly installing a smoke detector in your home. Smoke detectors find hazardous and dangerous smoke before you do. Stay in the safe side and buy a fresh smoke detector. Be sure to check the batteries monthly when tragedy strikes, to make sure that it is working accurately.
Don't be fooled by cheap imitation flooring. Granite, Marble and tile are better than imitation variations of the. Floors must not have linoleum unless in an apartment, counters ought to be tile, granite or marble. There are several alternatives that are affordable that there is really no reason for plastic variations of the real thing.
Consider adding more rooms to your house or transforming it into a loft in the event the ceiling is rather low, should you have an attic you do not use. This can certainly increase the worth of your home besides giving you more space. Remember to use appropriate isolation to avert your new rooms from getting too cold or damp.
You need to put in a dormer window to make the area more usable if there is a lot of space in the attic. This adds allure to your house, along with potentially doubling your square footage. This increases your property value and provides you a lot more living space for quite a modest investment.
So now we’re continuing on from the first part of this adventure of replacing our dishwasher (part 1 is here).
The next thing we are going to do is we are going to connect our dishwasher fitting to our supply line. Dishwashers come with two different styles of a fitting. One is 3/8ths IPS by 3/8ths compression, the other one is three quarter hose thread by three eights compression. And this is becoming more and more popular – the three quarter hose, in fact this dishwasher takes it and it did not come with it.
So make sure you check the instructions or ask where you purchase your dishwasher, if you need a fitting, because in some cases you are going to have to pick one up. So what I am going to do is I am just going to take this fitting, I am going to use a pair of pliers and a channel lock to hold the fitting and I am just going to snug this down first and then I am going to, actually, a little tip, take a little tape and tape down your supply line, your discharge hose and your electrical supply and then you’ll be able to slide the dishwasher right over the top of all three.
I just pushed the dishwasher back in place and we are going to connect all of the replacement parts (plus a little guidance from the experts at Austin Appliance Masters – http://austinappliancemasters.com). Now we are going to take a level, so we are going to adjust our front legs. And I like these just inexpensive plastic levels with a magnet on it and it just makes it very easy to do jobs like this. So now we’ll just take our feet and we’ll bring it up to its plumb, just like that and then we’ll set the level on the top.
Now I am going to take the water supply, I am going to take this three quarter inch hose thread and I am going to connect this to the water inlet on the bottom. You want to hand tighten this and snug it down and then you are going to use a pliers and do a quarter inch a time until it snugs up. You definitely don’t want to over tighten this and make sure you hand thread it first, so you don’t cross thread it.
Next step, you are going to connect your hose and our just has a push fit fitting, so depending on the manufacturer, it’s going to be a little different. But this one just snaps into our rubber gasket. For this dishwasher, it uses a hose clamp to hold that hose in place and i really like this channel lock hose clamp pliers and you can see this little indentations are designed to snap into this and grab it and hold it in place. So if you want a specialty tool, this channel lock do a nice job for this type of repair.
In the Tucson area we have flexible metal conduit and we don’t have a ground that metal conduit is going to be grounded all the way back.We are going to twist our black wire to the black wire, the white to the white and then put our cover back on. If you are using non metallic cable, you are going to want to make sure you are going to put the ground bare wire to the grounding screw inside the box.
Everything is connected underneath, I am just going to drill a couple of pilot holes and connect these brackets to the bottom of the counter top. The last thing, you’ll just put your access panel on the bottom, you’ll turn on the water and then turn on the electric. And those are the steps to replace a dishwasher.
We’ll go through the steps on how to replace a dishwasher. So if you have an old existing one, the first thing you want to do is look at the water supply and in this case we have solid copper and I am just going to change that to a flexible stainless steel supply line. It’s going to make it much easier to move back and forth. And take a look at your discharge pipe and the hose, see how it is connected, in case you need any of the parts at the hardware store.
The first thing we are going to do is remove the bottom panel of your old dishwasher and we are going to test it with a tester, just to make sure we have the electric off. I like these non contact testers because you don’t have to open the box and take a chance in touching live wires. So we’ll go down, we’ll turn off the breaker, we’ll find which one operates that and then we’ll go to the next step.
I found the breaker that operates the electric for this and I doubled checked it, there’s no electric on, so I removed the cover to the box on the old dishwasher and it exposes the hot, the black wire and the neutral wire. We are using flexible metal conduit, which is grounded, and highly recommended by the expert appliance guys at www.appliancerepairtucsonaz.org.
So you’re either going to have no ground, if you are using BX like this and it goes all the way back to the service panel and it is grounded or you will have ground wire that’s going to be tied to this metal box. Inside, what I am going to do, there is a nut that holds this strain relief and that flexible metal conduit to this electrical box. So I am just using a regular screwdriver and I am going to hit that nut and unscrew this.
This will pull our electric away and I am going to use a small pan, put it inside here and using a small adjustable wrench, I shut off the water going to the dishwasher, then I am going to loosen the nut on that supply. So I disconnected the water supply and now I am going to disconnect the hose. Under the dishwasher, I just raised these feet a little bit, if you have a different height in your tile or wood, it’s nice to pull this up a little bit because the next step we’re going to loosen the screws or any brackets that hold the top of the dishwasher in place.
So now on this one, it just has two screws, so we’ll just unscrew them and that will allow us to bring the whole unit out. Once you have the top bracket or screws loose, you can just pull the whole unit out. I have the new supply line connected and I connected it to the valve. What you are going to want to do is take a bucket, open that valve and bleed out in case there is any debris or anything built up and let that run for a few seconds, until it runs clear, shut it back off and then you will be able to connect this to the new dishwasher.
The next thing we want to do is connect the discharge hose to either a garbage disposal, if you have one, or we are connecting it this time to a slip joint with a hose barrel by it. So we are going to connect it to this and then we are going to use a clamp to clamp it in place and make sure you are read your instructions. Different models are different, this one wants to be about 20 inches high with this loop.
So we have a cold cut into the top of the cabinet, which will set it at the correct height. Now that we have the new dishwasher, we pull off the bottom panel, so it exposes everything to us and now they have a chart for the back legs. Before we slide this into the opening, we are going to measure the distance between the floor and the bottom of the counter top and we are going to adjust this.
There’re going to have a few different settings for the back legs. We want to set that first because when we slide it in, we are going to level it by adjusting the front legs. Every dishwasher is going to be a little bit different. This one has a bracket that we are going to insert into a little slot here and then we are going to use a pair of pliers and we are going to bend these tabs up and we are going to lock it in place. This is going to allow us to screw it up into the bottom of the counter top.
This was getting a bit long for a single post, so we’ll continue on with more here in the second half… here.